Environmental Test Chambers

Product Details:

(Vertical and horizontal) temperature, humidity and vibration combined environmental test system, Reproducing more realistic field condition with simultaneous vibration along the X, Y and Z axes, The Multi-axis Vibration Combined Environmental Test System is a environmental test system that combines a temperature and humidity chamber and multi-axis vibration test system. This model uses a multi-axis vibration test system, which enables simultaneous vibration along the X, Y and Z axes in the vibration equipment, thereby eliminating the need to change samples when changing the vibration axis (X, Y and Z axes) and reproducing a vibration environment similar to that in which the sample is actually used. With these advantages, this chamber is the ideal test system for performing combined environmental tests on automotive parts and car electronics products and parts.

Improved test efficiency by eliminating switch vibration axes:

• With a vibration device in which vertical (Z axis) and horizontal (X/Y axes) vibration are performed using separate tables, changing from a vertical vibration test to a horizontal test requires switching the power transmission from the vibration generator from the Z axis to the X and Y axes, and the sample must be moved from the vertical table to the horizontal table at the same time. 
• This chamber, however, can perform both vertical and horizontal vibration on one table, thereby preventing a waste of time due to stopping of the test. Testing can also be automated for more efficient work.

Ideal for drive simulations with a more realistic vibration environment:

• To evaluate whether automotive parts functions properly, the parts must be subjected simultaneously to environmental factors, such as temperature, humidity and vibration, similar to the actual field condition, and mutually-induced flaws must also be checked.

Independent testing of temperature/humidity and vibration (simultaneously along the X, Y and Z axes):

• With a separate temperature and humidity chamber and multi-axis vibration test system, this device can perform temperature characteristic testing with the temperature and humidity chamber and vibration testing simultaneously along the X, Y and Z axes.

Product Details:

This chamber subjects specimens not only to temperature, humidity, and other atmospheric environmental stress but also to vibration, shock, acceleration and other physical (mechanical) environmental stress. Based on the Platinous series Temperature (& Humidity) Chamber, this model was jointly developed with vibration system manufacturers, which have a wealth of experience with vibration systems. These models use the same touch panel instrumentation screen adopted Platinous series.

Product Details:

Reproducing combined environmental stress that is the same as when actually vehicle is driven, Perform evaluation testing of laser radar sensors and other on-vehicle sensors. The On-vehicle Sensor Evaluation Testing System is used to ascertain issues that might occur during operation of laser radar sensors and back sonar for a vehicle-to-vehicle control cruising system installed around the bumper. You can perform evaluation tests similar to actual running in short periods by this system to compositely reproduce the various types of stress (temperature, humidity, vibration, saltwater, mud water, soap water) encountered during actual operation.

Supports flood tests:

• In addition to thermal cycle testing and vibration testing, it is also possible to spray saltwater, mud water, and soap rinse water to achieve results closer to actual running.

Openings installed in the ceiling:

• The system is designed with openings in the ceiling to enable work in the test area when installing a specimen.

Corrosion resistant:

• The inside chamber is made of titanium to prevent corrosion from saltwater. In addition, the heater and cooler are also made of titanium to enhance durability.

Combine with a vibration system:

• As an option, you can combine this system with a vibration system to perform more complex environmental testing. 
• You may be able to use your own vibration system with this system depending on the model. 

Product Details:

Supports various solar cell module tests:

• The test area dimensions of the FM Chamber can accommodate changes in units of 50 mm according to the module size and number inserted. 
• The chamber support various IEC standard tests.
• It can also be used as a temperature and humidity chamber for PID evaluation by adding insulation measures and high-voltage static charge prevention measures.

Features:

• Jig for easy handling of large modules (optional)
• Supports insulation measures and high-voltage static charge prevention measures. (Optional)