Salt Spray Test Chambers

Product Details:

Product Details:

• Allows to program corrosion cycles in selectable modes with respective timers:
• Salt Spray mode
• Immersion mode
• Saturated Humidity mode by condensation
• Climatization mode ( controlled relative humidity and temperature)
• Forced Air (Air Forced Drying)
• Low Temperature mode
• Saturated Humidity mode by atomization (water fog) optional
• Spray mode (Stress Test)
• Custom sizes available.

Product Details:

The SS series chamber line simulates accelerated environmental weathering testing via a tightly controlled solution consisting of water/sodium chloride (NaCl) with humidity inside the testing chamber. This testing allows customers comparative results testing or commonly known as ‘quality audit’ comparison between a number of samples. The SS series is available in (4) sizes, SS600, SS1000, SS1300 and 3000 with economical mode available in SS600e and SS1000e. All equipment built to UL508a standards. The SS series equipment is designed to meet all major international standards including ASTM B117 (SS), ISO 9227 (SS, CASS, AASS), ASTM B368 (CASS), ASTM G85-A1 (AASS), JIS Z2371, MIL, and other standards to meet customer requirements. Equipment is built with double wall fiberglass ensuring low maintenance. Special sizes available are upon request.

Industries Served:

• Paint, Protective Coatings, Petro/Chemical, Electrical Components, Automotive, Furniture, Aviation, Aerospace, Research Centers, Laboratories, Cosmetics salt-spray-chamber-details

Chamber Details:

• Water Jacket,as outlined in ASTM B117 to ensure temperature uniformity of testing chamber.
• Lid designed with smooth surface and without seams per ASTM B117, to prevent contamination of samples from water drips.
• Unibody construction incorporating solution tank, bubble tower in one cabinet.
• Atomization Tower built to ASTM B117 standards ensure fog uniformity and homogenous test results.

Product Details:

CCT (or cyclic) chambers provide the closest comparison to “real world” laboratory testing for naturally occurring corrosion. Specimens under test are exposed a series of different environments such as: Salt Fog with humidity, saturated humidity, dwell, Test time, atmospheric conditions, recipes are all controlled by PLC/touch screen including diagnostics and alarms. All equipment is built to UL508a standards. Unlike salt spray testing, CCT testing correlates closer to realistic, naturally occurring conditions, but with a setup change this equipment can also test under Prohesion type testing as described by ASTM G85 A5. The CCT series is designed to meet strict construction protocaul cited by ASTM, DIN, ISO, JIS, MIL and other standards. Three sizes to choose from, CCT600, CCT1300 and CCT3000 with software provided for easy programming and periodic/preventative maintenance.

Product Details:

Water Resistance Test Chamber chambers create a saturated humidity/heated environment under DIN ISO 6270-2, DIN 50017, ASTM D2247.

Product Details:

The KEQ series chamber utilizes a high humidity/slightly acidic atmosphere under strict controlled conditions. Samples are exposed to environments simulating real life conditions as gases from combustion engines, heating systems or industrial type atmospheres including acid rain. DIN EN ISO 6988, ASTM G 87, DIN 50018.

Product Details:

Copper acetic acid salt spray applications involve testing of aluminum alloys, electrodeposition of nickel/chrome and copper nickel/chrome found on ABS (Acrylonitrile Butadiene Styrene) plastics and metals in accordance with ISO 9227, ASTM B368 and JIS Z-2371. CASS testing is similar in scope to salt spray neutral pH testing but with the addition of corrosive agents such as Copper, Acetic Acid and with elevated.

Product Details:

When a rubber-laden composite material is vulcanized under pressure, bubbles are generated within the material due to insufficient vulcanization in the final phase of the process. The blow point stands for the minimum vulcanization level required for eliminating the existence of these bubbles. To make a product with no bubbles in a shorter time of vulcanization, it is very important to measure the blow point. The blow point may change according to the composition, mixing method, temperature conditions, etc. of the rubber-laden materials. Therefore, it is necessary to make measurements very frequently during quality control of vulcanized rubber, research and development of rubber composites, and other operations.   

Features:

• An auto run can be made simply from a data processor.
• On completion of vulcanization, the blow point can be obtained simply by cutting the molded material, measure the bubble positions, and entering the measured values into the data processor.
• Molds of three kinds of thicknesses allow you to make a blow point measurement most suitable for your needs.

Mold:

• Material: S50C hard chrome plating
• Selected from following 4 types (1 piece of mold is included as standard
• accessory)
• 10mm type  Inside dimensions: W55 x L140 x H6~10mm tapered (Standard) 
• 20mm type  Inside dimensions: W55 x L140 x H6~20mm tapered

Product Details:

The EQNA-UV chamber is designed as an accelerated weathering test chamber replicating the effects of irradiation UVA or UVB and condensation or rain spray. The chamber accelerates the degradation and aging process causing loss of gloss and color, mechanical resistance, blisters and oxidation. This chamber comes with a Radiometer with NIST certificate, interface with command panel of EQNA-UV for calibration of UV sensor which monitors the irradiation during test. SAE, ASTM, ISO.