Sams Advanced Climatic Technologies Private Limited

• ^{Versatile vibration controller provides a wide range of test types.}
• ^{Ideal for benchtop testing}

• Suitable for various types of bench-top testing.
• Vibration controller: Enables complicated vibration tests being coupled with the vibration controller.

• The addition of rotational motion to a three-axis system enables 6 degree-of freedom testing, as is required for vehicle seat evaluation, for example.

• This model enables large displacement and high speed vibration testing, which cannot be achieved with a multi-axis vibration test system. 

• In combined environmental testing, the temperature and humidity chamber and vibration test system operate sequentially, but each function can also be operated independently. 
• This model enables temperature characteristic testing with the temperature and humidity chamber and vibration testing at ambient temperature.

• To improve the temperature and humidity performance, the temperature and humidity chamber and vibration test equipment must have a good seal. With this model, in particular, the temperature and humidity chamber slides over the vertical and horizontal tables, so this is even more of an issue. 
• ESPEC's unique direct coupling to the chamber floor method ensures a good seal not only vertically but also when connected horizontally.

• Manufactured products can be exposed to both thermal and mechanical stresses.
• These should not be considered separately, as the effects may be linked.
• IMV can supply vibration-test systems combined with climatic chambers to provide complete vibration, temperature and humidity environmental testing.
• These systems can be custom-designed to meet your application.

• With a vibration device in which vertical (Z axis) and horizontal (X/Y axes) vibration are performed using separate tables, changing from a vertical vibration test to a horizontal test requires switching the power transmission from the vibration generator from the Z axis to the X and Y axes, and the sample must be moved from the vertical table to the horizontal table at the same time. 
• This chamber, however, can perform both vertical and horizontal vibration on one table, thereby preventing a waste of time due to stopping of the test. Testing can also be automated for more efficient work.

• To evaluate whether automotive parts functions properly, the parts must be subjected simultaneously to environmental factors, such as temperature, humidity and vibration, similar to the actual field condition, and mutually-induced flaws must also be checked.

• With a separate temperature and humidity chamber and multi-axis vibration test system, this device can perform temperature characteristic testing with the temperature and humidity chamber and vibration testing simultaneously along the X, Y and Z axes.

A new standard created by listening to our customers.

The A-series meets a wide range of test requirements and specifications for a versatile testing environment.
It has advanced automatic energy-saving technology and a high level of functionality
and provides an improved working environment for vibration testing.

Standard 76.2 mmp-p Displacement

A-series complies with international safety standards.

Rapid creation of tests from a set of pre-defined templates conforming to most international test standards.

Test files are automatically generated upon selection of the test conditions defined by the test standards. Tests can then be carried out just by pressing the start button.

Statuses for vibration generator, amplifier test proceeding, and specimen can be observed on a PC or tablet by either wired or wireless LAN. Solutions can be seen on the Web browser upon the occurrence of any error. Installation of additional software is not necessary for PC or tablet.