Sams Advanced Climatic Technologies Pvt Ltd
Sams Advanced Climatic Technologies Pvt Ltd
Madhapur, Cyberabad, Andhra Pradesh
SEND SMS
SEND EMAIL

Specialty Chambers

Providing you the best range of Specialty Chambers such as Altitude Chambers, Settling Dust Environmental Chambers, Environmental Stress Screening (ESS), HAST Chambers, Solar Panels Chambers EWSX282 Series, Solar Panel Testing Chambers ENX112 Series and many more items with effective & timely delivery.

EWSX282 Solar Panel Large Walk-In Chambers

EWSX282 Solar Panel Large Walk-In Chambers
  • EWSX282 Solar Panel Large Walk-In Chambers
Ask For Price
EWSX282 Solar Panel Large Walk-in Solid walk-in chamber designed for testing up to 20 PV modules

 

ESPEC’s solid construction walk-ins are desirable for testing large loads of PV modules or panels at 85°C/85% as well as humidity-freeze and temperature cycling tests. Hermetically welded seams and stainless-steel interior ensure integrity under extreme conditions required by IEC.

The models come in different performance versions, depending on your application. More powerful performance allows you to complete the temperature-cycling test faster, or with a maximum number of modules. There also is a 'damp-heat' only model that saves you capital-cost and energy.

 

Easy-to-use Programmer

In addition, the P-300 programmer makes running an ESPEC environmental test chamber a breeze. The full-color, touch-screen interface is remarkably easy to use and understand. The P-300 can be managed remotely via our new Ethernet/LAN-based Web Controller, serial port, or GP-IB/LabView.

 

Request
Callback
Yes! I am interested

ENX112 Solar Panel Compact Walk-in

ENX112 Solar Panel Compact Walk-in
  • ENX112 Solar Panel Compact Walk-in
Ask For Price
ENX112 Solar Panel Compact Walk-in Compact walk-in chambers for testing solar panels

The ENX112 chambers provide a test chamber large enough for testing full-size PV modules in the least amount of floorspace. Can be use for panels 1.2m x 2m or larger.

These models provide a variety of performance capabilities to meet maximum or minimum change rates in IEC or UL test standards. Incorporated are the features of our smaller Platinum and Global-N lines. The refrigeration systems of these models utilize modern, high performance scroll compressors that allow a small footprint while allowing unparalleled service access.

The models come in different performance versions, depending on your application. More powerful performance allows you to complete the temperature-cycling test faster, or with a maximum number of modules. There also is a 'damp-heat' only model that saves you capital-cost and energy.

 

Easy-to-use Programmer

 

In addition, the P-300 programmer makes running an ESPEC environmental test chamber a breeze. The full-color, touch-screen interface is remarkably easy to use and understand. The P-300 can be managed remotely via our new Ethernet/LAN-based Web Controller, serial port, or GP-IB/LabView.

 

Features:

 

  • Performance to meet IEC 61215, 61646, UL-1703 and similar test requirements
  • 10.11 Temperature cycling
  • 10.12 Humidity freeze
  • 10.13 Damp heat
  • Large interior volume
  • Touch-screen controller
  • Viewing window
  • Compact footprint of 5' x 11'
  • Optional module rack with rollers
  • ENX112 rack can hold 1.2m x 2m panels
  • ENX133 rack can hold 1.2m x 2.4m panels
  • ENX164 rack can hold 1.8m x 2m panels
Request
Callback
Yes! I am interested

ENX48 Solar Panel Reach-In Chambers

ENX48 Solar Panel Reach-In Chambers
  • ENX48 Solar Panel Reach-In Chambers
Ask For Price
ENX48 Solar Panel Reach-in Extended-height Platinum-series chamber for testing solar panels up to 1.2m tall

Your first choice for a medium-size test chamber for PV module testing is ESPEC's ENX48.

These models provide a variety of performance capabilities to meet maximum or minimum change rates in IEC or UL test standards. Incorporated are the features of our smaller Platinum and Global-N lines. The refrigeration systems of these models utilize modern, high performance scroll compressors that allow a small footprint while allowing unparalleled service access.

The models come in different performance versions, depending on your planned use. More powerful performance allows you to complete the temperature-cycling test (10.11) faster, or with a maximum number of modules. There also is a 'damp-heat' (10.13) only model that saves you capital-cost and energy by having only minimal refrigeration.

Easy-to-use Programmer

In addition, the P-300 programmer makes running an ESPEC environmental test chamber a breeze. The full-color, touch-screen interface is remarkably easy to use and understand. The P-300 can be managed remotely via our new Ethernet/LAN-based Web Controller, serial port, or GP-IB/LabView.

 

Features:

 

  • Performance to meet IEC 61215, 61646, UL-1703 and similar test requirements
  • 10.11 Temperature cycling
  • 10.12 Humidity freeze
  • 10.13 Damp heat
  • Large interior volume
  • Touch-screen controller
  • Viewing window
  • Optional module rack with rollers
Request
Callback
Yes! I am interested

HAST - Highly Accelerated Stress Test Chambers

HAST - Highly Accelerated Stress Test Chambers
  • HAST - Highly Accelerated Stress Test Chambers
Ask For Price

HAST (Highly Accelerated Stress Test) chambers reduce the time it takes to complete humidity testing for semiconductors. By elevating temperatures above 100°C and increasing the pressure, simulation of normal humidity tests can be made while maintaining the same failure mechanisms. Tests can be completed in days, not weeks.

Our HAST systems have a modern design that's easier to use:

  • Automatic humidity filling
  • Automatic door lock
  • A more square workspace, allowing more product to be loaded
  • Convenient, hermetic power-pin system for bias testing

We now offer a hermetic port connection to allow special signal lines like coax or fiberoptics to be run into the chamber. You can use hermetic port plugs like those from Buffalo Conax with this port system.

 

Operation Features:

  • Unsaturated or saturated humidity control
  • Multi-mode M System (wet bulb/dry bulb) controls humidity, even during heat-up and cool-down. Fully conforms to EIA/JEDEC Test Method A110 102C.
  • Programmable controller with temperature, humidity, and count-down display. Stores up to 10 test profiles, with 30 steps per profile.
  • 12 Specimen power terminals, allows power-up of specimens (12 per workspace on "double" units)
  • Two feed-through ports, each 0.75" NPT (standard on units sold in North America only)
  • Automatic fill of the humidity water at the start of a test (except TPC)

 

Cabinet Features:

  • Inner cylinder and door shield protect specimens from dew condensation
  • Interior is shaped more like a square for easier product loading (TPC model is cylindrical)
  • Two stainless steel shelves
  • Set of casters for easy movement of the chamber (except double-stacked models)
  • Push button door lock (except TPC)
  • Bottom of the unit allows storage space for peripheral equipment

 

Safety Features:

  • Overheat over-pressure protectors
  • Door lock safety mechanism to prevent opening of the door while the chamber is pressurized
  • Specimen power control terminal: shuts down the product power in the event of an alarm
Request
Callback
Yes! I am interested

Settling Dust Chambers

Settling Dust Chambers
  • Settling Dust Chambers
Ask For Price

The ESPEC EDC dust chambers provide a ready-made solution to common dust test standards for automotive and electronic-cabinet requirements. Often specified for use with "Arizona fine dust", these units can also be used with talcum or concrete powder. The chamber has a "clamshell" type door/lid for easy front-loading, compared with top-loading chambers. Optional reach-in glove ports allow rotating the test sample without opening the door.

Test standards met:
  • SAE J575 (Rev. NOV2006), Section 4.5
  • ISO 20653 (2006-08-15), Section 8.3.1
  • DIN 40050, Part 9, IP Codes 5K and 6K, vertical dust flow
  • IEC EN 60529 (IEC 529), IP-5 and IP-6, vertical dust flow (with optional underpressure mode)
  • IEC EN 60068-2-68 (IEC 68-2-68), LA2, vertical dust flow

Other sizes and capabilities available upon request. Please contact us with your application.

 

Features:

 

  • Stainless steel interior and exterior
  • W-shaped bottom for improved dust collection dispersion
  • Easy-access clamshell door with viewing window and optional glove ports
  • Mesh product shelf
  • Two inch cable port
  • Timers for agitation and settling periods

 

Options:
  • Two reach-in glove ports
  • Dry air purge to maintain dryness
  • Evacuation (Underpressure) System for DUT, as required by IEC 60529
  • ISO 12103-1 Arizona test dust
Request
Callback
Yes! I am interested

Rain & Spray Test Chambers

Rain & Spray Test Chambers
  • Rain & Spray Test Chambers
Ask For Price
Our Design

ESPEC's modular design allows you to add on additional features, depending on the number and type of tests required. One possible choice is to integrate the spray system with a regular temperature and humidity chamber to save money and floor space, while also creating an opportunity to simulate actual operating conditions your product may experience.

Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range. The water is fed to a motorized manifold that rotates the spray arms. Each spray arm has an adjustable valve to allow finer control of the spray.

 

Testing capabilities (JIS D 0203, SAE J575)

 

The SAE specification J2245 is modeled after the JIS D0203 and doesn’t differ greatly. Details about the nozzle types and the rotating nature of the spray arms and product table are also included in the requirements. Additionally, drip and car wash tests are also specified.

Heavy splash/shower
  • S1 Spray room temperature water with 40 nozzles at 14.2 psi (1 kgf/cm2) for 30 minutes. The flow rate of the water shall be 6.5 gallons/min. (24.5 L/m).
  • S2 Spray room temperature water with 40 nozzles at 42.7 psi (3 kgf/cm2) for 60 minutes. The flow rate of the water shall be 10.3 gallons/min. (39.2 L/m).
Light spray/rain
  • R1 Spray room temperature water with two nozzles at 4.3 psi (0.3 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.8 gallons/min. (3.2 L/m).
  • R2 Spray room temperature water with two nozzles at 1.4 psi (0.1 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.5 gallons/min. (1.9 L/m).

 

Examples of OEM automotive manufacturers' requirements
  • Heat the sample to a temperature above boiling, then spray with cold water for about two minutes. Repeat cycle.
  • Heat the sample to boiling temperature, then spray with room temperature water for about fifteen minutes. Repeat cycle.
  • Simulate a car wash by using high pressure spray.

 

Features:

 

  • Rotating rain and spray nozzles designed to JIS specifications
  • Speed control for the rotating spray nozzles
  • Stationary product shelf - A rotating shelf is optional: see options
  • Water pressure regulators, gauges and flow meters
  • Special high-volume floor drain system to rapidly drain water out of the chamber
  • Interior chamber size is the smallest possible area using the JIS specified nozzles

 

Applicable Test Methods
  • JSA JIS (Japanese Industrial Standard) D 0203 "Method of Moisture, Rain and Spray Test for Automobile Parts"
  • SAE (Society of Automotive Engineers) J2245 "Recommended Practice for Splash and Spray Evaluation"
  • SAE J575 "Test Methods and Equipment for Lighting Devices and Components"
Optional/additional test capabilities:
  • Temperature/humidity controlled rain chamber:  Includes -20 to 150°C and 20 to 98%RH capabilities
  • Water recirculation:  Allows re-use of the treated rain water
  • Water conditioning:  Allows the water to be cooled (5 to 20°C) prior to spray
  • High pressure spray:  Adds capability to meet car wash test requirement
  • Drip nozzle:  Adds capability to meet drip test requirement
  • Rotating table:  Rotates the sample for full exposure to spray
Request
Callback
Yes! I am interested

Altitude Chambers

Altitude Chambers
  • Altitude Chambers
Ask For Price

ESPEC can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:

  • Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
  • Simulation of high-altitude conditions like might be found in mountainous regions.

Applicable test methods (depending on chamber system specified)

  • Mil-Std 202G (conditions 105C, A/B/C/F)
  • Mil-Std 810G (condition 500.5)
  • IEC 60068-2-39
  • IEC 60068-2-40
  • RTCA/DO-160F
  • JIS W 0812

NOTE: Altitude chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let ESPEC know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.

Features:

  • Temperature range from -70 to 170°C
  • Altitude range from ground to 100,000 feet
  • Optional humidity control when altitude system is off
  • Chamber interior size specified by customer
  • Automatic altitude control, integrated with temperature controller
    —No manual setting of altitude level!
  • Vacuum pump sized for climb/dive rate required by application
  • Viewing window and cable ports available
Request
Callback
Yes! I am interested

Calorimeter

Calorimeter
  • Calorimeter
Ask For Price
Multi-Calorimeter MCM-2

This can make UL tests to give many quantitative data including amount of heat generation and decrease of weight for the development of flame resistant materials and evaluation of combustion characteristics. It can be used for three kinds of assessment tests with the same chamber: Standard UL test, UL test for small specimen, and CONE test for small specimen.

Specifications:
  • Display: LCD Programmable or equivalent
  • Wavelength Range: 400-750nm
  • Wavelength Selection: By
Request
Callback


Additional Information:

  • Item Code: MCM2
Yes! I am interested

High Excitation Force Water Cooled Chambers

High Excitation Force Water Cooled Chambers
  • High Excitation Force Water Cooled Chambers
Ask For Price
High Excitation Force Water Cooled Type K-series

High Excitation Force and Silent Water Cooled System for Improving Test Environment

High exciting force water cooled vibration simulating systems developed by IMV line up K-series. Cooling noise emitted during testing is significantly lower compared to air cooling systems. Performance of the K-series will definitely improve the user’s testing environment.

  • Sample Mount Screw
  • Location
  • Specifications
Features [Silent system design]The water cooling system produces neither the intake nor exhaust sounds that an air cooling system emits.[Record of significant accomplishments]IMV has been developing the water cooling system ahead of other domestic manufacturers. Table Insert Pattern ‘mm’ pattern (Unit:mm)

Specifications:
  • Absorbed Power (kW): 5.2
  • Detergent Tank (Ltr): 3.5
  • Dimensions: 52x43x93 in cm (LxWxH)

 

Request
Callback
Yes! I am interested

Durable Testing Chambers

Durable Testing Chambers
  • Durable Testing Chambers
Ask For Price
We offer our clients a best quality range of Durable Testing Chambers. These testing chambers are designed by our vendor’s trained experts by using high quality material and advanced equipment. Our testing chambers are highly praised by our customers for their unreserved applications and essential features. To attain the highest customer’s satisfaction, we have affordably priced these testing chambers without compromising with the quality.

Features:

  • Low maintenance
  • Sturdy design
  • Perfectly finished

 

Specifications:

  • Type - Test Chambers
  • Material - MS
  • Size - Customized
Request
Callback
Yes! I am interested

MT/MW Series Bench Top Chambers

MT/MW Series Bench Top Chambers
  • MT/MW Series Bench Top Chambers
Ask For Price
Being one of the renowned organizations in the market, we are highly engaged in offering a unique grade of MT/MW Series Bench Top. Our offered bench top chamber is designed at vendor’s manufacturing unit by utilizing finest material and updated machinery in harmonization with distinctive quality standards. Along with that, these bench top chambers are examined by our quality superintendents in terms of quality in order to deliver flawless range. Moreover, customers can take these bench top chambers from us at nominal rates.

Features:

  • Purpose specific design
  • Enhanced service life
  • Elevated quality

Other Details:


  • Two 2” (50mm) diameter cable port at left and right side each
  • Two adjustable stainless steel shelves
  • Intergrated hour meter
  • Specimen power supply control terminal
  • USB drive

Specifications:
Model / LinkInterior DimensionsInterior VolumeTemperature RangeHumidityNotes
(W x D x H mm)Range(%RH)
MW3030300 x 250 x 25018.7-30 to 15025 to 98220V 50Hz
MT3065300 x 250 x 25018.7-65 to 150None220V 50Hz
Request
Callback
Yes! I am interested

Environmental Stress Screening Chambers

Environmental Stress Screening Chambers
  • Environmental Stress Screening Chambers
Ask For Price

Environmental stress screening (ESS) is also known as Burn-in, AST (Accelerated Stress Testing), HALT (Highly Accelerated Stress Test), or HASS (Highly Accelerated Stress Screening). Whatever the name, the idea is the same: create a test program that allows you to eliminate the infant mortality of your product.

ESS5/11 SERIES
The ESS5/11 Series provides the unique capability of stress screening products in a small, lab-type chamber. Pre-qualification for ESS, troubleshooting, and small scale ESS programs would all benefit from high air flow, high change rate testing in this compact design. This series can accommodate up to six product drawers from our standard ESS systems. Other features include non-CFC/HCFC design, and wide variety of control systems, refrigeration system sizes, and product fixturing options.

ESS22/35 SERIES

The ESS22/35 Series offers high volume horizontal airflow for rack systems. The chambers can be adapted to many product configurations and provide manual, automatic robotic interface. A variety of methods are available for product power and test interface including auto insertion. Provides fast product change rate with while maintaing uniform stress.

ESS85 SERIES

Our ESS85 Series chambers have set the industry standard for performance, throughput and flexibility. The fixtured cart allows a variety of products to be tested, multiple carts for faster loading/unloading and inexpensive changeover to new products. The high-volume, horizontal airflow provides maximum product change rates. The standard dry air purge safeguards against condensation during rapid temperature changes.

Specification:
  • Wide variety of refrigeration available for performance and range flexibility.
  • Programmable control for product or air-change available.
  • Automatic insertion/coupling for product power possible.
  • LN2 cooling for even faster change rates.
  • Voltage: 210
  • Power: 12kw
Request
Callback
Yes! I am interested
X
Looking for “Specialty Chambers”?


Reach Us
Rajavardhan Rao (Managing Director)
Plot No. 646, Ayyappa Society Madhapur
Cyberabad- 500081, Andhra Pradesh, India


Call Us

Send E-mail

Send SMS