Thermal Shock Chambers

Product Details:

Traditional three-zone thermal shock chambers can be quite large, as three separate chambers are used. The TSA series has just one chamber, substantially reducing its size. Instead, it circulates cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the setpoint, allowing quicker recovery of the desired condition after transfer. New Eco-Mode is standard for all models. Eco-mode manages the pre-conditioning and modulates refrigeration systems to reduce energy usage. Savings of up to 50% over previous models is possible, or as much as 2,000 a year.

Features:

• "EL" models are lower cost models with only two-zone capability, lower performance, and partial savings of Eco-mode.
• "ES" models have higher performance, three-zone capability, and larger heating/cooling performance that fully benefits from Eco-mode innovations.
• The TSA-73EH-W is configured especially to meet the popular Mil-Std 883 1010 method, from -65 to 150°C.

1000 cycles without defrosting?:

• The new TSA models have a new patent-pending option that allows them to do thermal shock testing for 1000 cycles (or 500 hours) without needing a defrost step. This can save significant test time (other chambers may need defrost every 20-100 cycles), as well as saving additional energy.

Product Details:

• Test samples don't move
• Horizontal airflow design assures uniform results
• Extremely compact systems with a vertically sliding door for added space savings
• Utilizes the latest refrigeration technology: electronic expansion valve and scroll compressor

ESPEC’s Exclusive Touch-Screen Programmer:

• NEW: USB and Ethernet interfaces
• User-friendly touch-screen operation with large 9" color display
• Store 40 two-zone or three-zone test programs
• Programs may be written on a PC and uploaded via USB
• The trend-graph display shows a record of setpoints and actual values
• Operation data can be downloaded as needed, or continually, to USB
• Two time signal relays for automated on/off control of test devices/samples
• System alarms are stored in memory for historical review
• Built-in timer functions allow the chamber to be started or shut down automatically
• Pattern Manager Lite PC software for program editing and datalog viewing/exporting, to support USB functionality
• Ethernet interface for remote monitoring and operation control, as well as data downloading

Product Details:

ESPEC developed the TSD-101-W with an interior of 28"x16", while strictly limiting the overall size of the system. The footprint is reduced by 40%, as well as lowering power demand by 60% compared to conventional units. The TSD-101-W has been upgraded to our latest touch-screen controller, which includes a 7" screen and Ethernet access. Uploading/downloading of programs and data can be accomplished over your network. The TSD includes a unique feature called Specimen Temperature Trigger (STT). This STT function actively monitors the temperature of the product and only advances the program to the next step once the product has reached the desired temperature. The STT dynamically reduces the overall testing time by adjusting the soak period according to how much product is being tested.

Product Details:

• A flexible cabling tube (for monitoring or powering samples) that comes out the side, rather than a moving pipe that sticks out the top.
• A cool-down mode allows the operator to safely remove the samples quickly after a test is completed.
• An option for a window makes checking on the samples easier.

Site requirements:

• Main Power: North American standard 208V (alternate international power
• Cooling water supply
• Quiet operation with sound levels below 65dB

Available options:

• Paperless recorder with color display and CompactFlash storage
• Strip chart recorder
• Computer interface (IEEE-488 or RS-232)
• Viewing window
• Additional STT thermocouple inputs
• Additional flexible cable tube

Product Details:

Did you think that getting a thermal shock chamber was too expensive, required special utilities, and half your lab-space? The TSE-12 thermal shock chamber is the solution. Only 26 inches wide, the TSE-12 transfers product loads between cold and hot zones.

Features:

• Meets strict Mil-Std 883 1010.7/1010.8 thermal cycling requirements with 4 kg. (8 lbs.)
• Also can be used for IEC 61300-2-47, JEDEC JESD47E, JESD22-A104, and others
• Touch-screen operation is very easy, yet full-featured
• The cold zone is cooled by refrigeration. No need for tanks of liquid nitrogen (or cooling water supply)
• The only utility required is 208V power
• Super quiet operation of less than 60dB
• More benefits on this one-page PDF
• In stock for fast delivery

Product Details:

High temperature rate of change with uniformity and reproducibility, The Rapid-Rate Thermal Cycle Chamber is ideal for test requiring quick changes 15°C/min ramp rate in specimen temperature and 23°C/min ramp rate for air temperature. It covers various applications from JEDEC, IEC standards to screening. It features new technologies, such as a specimen temperature control function maintaining linear specimen temperature change rates during rapid thermal cycling, and temperature ramp control.

Compatible Test standards:

• IEC-60749-25 : Semiconductor devices – Temperature cycling
• IEC-60068-2-14 Nb : Environmental testing – Change of temperature
• IEC-61147-5 : Liquid crystal and solid-state display devices – Environmental, endurance and mechanical test methods
• JESD22-A105-B : Solid State Devices, testing quality and reliability – Power and temperature cycling
• SAE-J1211 : Automotive components - Recommended environmental practices for electronic equipment design
• IPC-9701 : Performance test methods and qualification requirements for surface mount solder attachments

Product Details:

With increased modularization and digitization, more electronic parts are used on automobiles in various locations. However, these parts are constantly exposured to high temperatures due to the heat generated by the engine and gears, and the parts are rapidly cooled down by water splashes from the road and rainwater. The developed "Air to Liquid Thermal Shock Chamber" is ideal for reliability and endurance testing of electronic parts exposured to such rapid thermal shocks. The cold chamber adopts a water chamber to apply the specimen to rapid thermal shock. It is impossible to achieve with an air to air thermal shock chamber, thereby creating a thermal shock environment that is more similar to the actual environment.

Unique thermal shock system:

• This unique thermal shock system uses different types of chambers for both the hot and cold chambers, an air chamber for the hot chamber and a water chamber for the cold chamber.

Labor-saving thermal shock testing:

• Conventional thermal shock tests using a water chamber were required manual operation into the water chamber. 
• The specimen is transferred between chambers automatically; the testing can be performed simply by setting the program and reduces labor and time.